TYPE CB8 / CB6 Compact CB6

Disc Brakes Tips TEXU The brakes of the TEXU series are double operating disc brakes which work according to the precept of a conventially drum brake. The braking force will be transmitted to the brake disc on two symmetrically points. Consequently the tangential forces at the shaft are compensated. The speciality of this brake is the actuating of both callipers with 2 parallel mounted spring tubes in relation with only one concentrically mounted thruster. By closing the brake, the force of the springs will be evenly distributed by the linkage to both pairs of brake levers. Now the levers move identical towards the shaft and thereby the separate beared calipper levers will be effected with wedges and rolls. Furthermore the brake is equipped with a synchronisation linkage, which ensures an evenly spaced out air gap at all 4 linings. The wear of the linings and the consequently increasing air gap will be compensated by our reliable automatic wear compensation.

SERVICE BRAKES - Tips USB These brakes are designed considering the specific demands of crane-, lifting- and material handling applications and is the consequent result of the continuous research and development performed by SIBRE.

SERVICE BRAKES - Tips USB These brakes are designed considering the specific demands of crane-, lifting- and material handling applications and is the consequent result of the continuous research and development performed by SIBRE.

SERVICE BRAKES - Type TE The TE series drum brakes shown here have been developed using state of the art industrial brake technology according to DIN 15435. This robust model was particularly designed for use in general engineering, metallurgy, crane and conveyor plants, for use both underground and above ground, as well as in wind turbine plants. These brakes are for use whenever a constant brake torque is of utmost importance, not only for reasons of safety but also from a commercial standpoint.